Disc/Usb Playback; Basic Playback - Sony MHC-V6D Operating Instructions Manual

Disc/USB Playback

Basic playback

1
Select the function.
For DVD/CD function:
Press DVD/CD.
For USB function:
Press USB repeatedly until "USB A"
or "USB B" lights up on the display.
2
Prepare the playback source.
For DVD/CD function:
Press  on the unit to open the disc
tray and load a disc with the label
facing up on the disc tray.
When you play back an 8 cm disc
such as a CD single, place it on
the inner circle of the tray.
Press  on the unit again to close
the disc tray.
Do not forcibly push the disc tray to
close it as this may cause a
malfunction.
20
GB
For USB function:
Connect a USB device to the A or
B port according to your selection
in step 1.
USB device
Note
You can use a USB adaptor (not
supplied) to connect the USB device
to the unit if the USB device cannot be
plugged into the port.
3
Press  to start playback.
Other operations
To Do this
Stop playback Press .
Press .
Pause
playback
Press .
Resume
playback or
return to
normal
playback
Press 
Cancel the
resume point
Press  or 
Select a track,
file, chapter or during playback.
scene
Or, press the numeric
buttons, then press
(Operation might be
prohibited by disc or
USB device)
.
twice
.