General
Button Lock
Standby Control
Lamp Schedule
OSD Display
- The displayed image may differ depending on the model.
Button Lock
It sets safe lock function.
Off
•
This menu can be used to lock the buttons on the product.
Auto
Only the remote control can control the product if
Off
Standby Control
You can set the screen standby mode to be applied when an input signal is received.
•
•
•
Lamp Schedule
Enables the lamp value to be adjusted to a user-specified value at a specified time in MDC mode.
•
OSD Display
Displays or hides a menu item on the screen.
•
•
Off
/
On
Auto
Power-saving mode will activate if no input signals are detected even though a source device is connected to the display.
No Signal
The message
will appear if no source device is connected.
On
Power-saving mode will activate if no input signals are detected.
Off
No Signal
The message
will appear if no input signals are detected.
― The
Standby Control
option is only enabled when
― If
No Signal
is displayed although a source device is connected, check the cable connection.
Off
On
/
Source
OSD:
Off
/
On
No Signal
OSD:
Off
/
On
Button Lock
is set to On.
Source
is set to HDMI1, HDMI2, HDMI3.
105