Under Macintosh Operating System (Mac 9.X Or Later); Downloading Images From Removable Disk; Downloading Images Through Ulead Photo Explorer; Appendix - Konica Minolta Digital Still Camera KD-30M User Manual

PC Connection
Downloading the Image(s)

Under Macintosh Operating System (Mac 9.X or later)

Downloading Image(s) From Removable Disk
1. Turn on the PC.
2. Switch on the camera.
3. Connect the camera to the PC with
USB cable under any working mode.
Please make sure the USB cable is
well connected to the PC and camera.
4. When the USB cable is connected to
the PC, it will create a new icon
named "untitled" on the desktop.
5. Double click on the icon.
6. The stored image(s) can be found in
the folder of DCIM \ 100MEDIA \.
7. View any image by double-clicking it.
D ownloading I mage(s) T hrough U lead P hoto E xplorer
1. Connect the camera to the PC with
USB cable under any working mode.
Please make sure the USB cable is
well connected to the PC and camera.
2. Start Ulead Photo Explorer 7.0 SE
Platinum .
3. Click File \Download From Memory
Card to get the stored image(s).
62
122mm+-2

Appendix

Error Message Table

Message Cause
There is insufficient card
CARD FULL memory capacity to store an
image.
There is insufficient internal
MEMORY FULL memory capacity to store an
image.
CARD
LOCKED
The SD card is locked
(CARD ICON is
BLINKING)
The image can't be deleted
LOCK
while it is protected.
There is no image stored in the
NO IMAGE memory card or built-in flash
memory.
FILE ERROR
MEMORY ERROR
CARD ERROR
The environment is too dark in
LOW LIGHT! "Flash Off" or " Night Scene"
mode.
The environment is too dark in
HAND SHAKE ICON
"Flash Off" or " Night Scene"
( )
mode.
LENS COVER The lens cover is closed.
63
Solution
Delete the stored image(s) in the
memory card or insert a new
memory card.
Delete the stored image(s) in the
flash memory.
Set the SD card protection switch
to non-protection position.
Unlock the protected image.
Delete this image and take the
picture again.
Format the flash memory .
Insert a new memory card or
format the card
Set the flash mode to Auto Flash
or Fill-in Flash.
Set the flash mode to Auto Flash
or Fill-in Flash.
Please open the lens cover
before taking pictures.