Removing An Sd Card - Konica Minolta Digital Still Camera KD-30M User Manual

Getting Ready
Note
If a new SD card is used, it is necessary to format it first. Please refer to
page 33 for details.
Note
Images can be stored either in the camera's built-in flash memory or in the
memory card. If a memory card is inserted, images will automatically be
stored in it . If no memory card is inserted, images will automatically be
stored in the built-in flash memory.

Removing an SD Card

1. Ensure that the camera is switched off.
2. Open the Battery / Memory Card Cover.
3. Press down the SD card and the card will jump up.
4. Remove the card and close the Battery / Memory Card Cover.
18
122mm+-2
Getting Ready
Note
This camera comes with approximately 16 MB of memory installed,
but if you would like to use additional memory, the following
cards are compatible:
SD Memory Card
About the SD Memory Card
Caution
SD Memory Cards are manufactured using precision electronic
components. Do not perform the following as malfunction or
damage may occur as a result.
Do not touch the terminals with hands or metal objects. Damage
to the components may occur as a result of static electricity.
Before handling an SD Memory Card, discharge any static
build-up from your body by touching grounded metal, etc.
Do not bend, drop or apply excessive force.
Avoid heat, liquid and direct sunlight when using and during storage.
Do not open the battery/card cover or remove the SD Memory
Card while data is being read or written.
Do not dismantle or modify.
* The SD logo is a trademark.
19