Table of Contents
Advertisement
S
W
uper
orkstation 7038A-I User's Manual
5-11 Onboard Indicators
LAN1/2 LEDs
The Ethernet ports (located beside
the VGA port) have two LEDs. On
each port, one LED indicates activity
while the other LED may be green,
amber or off to indicate the speed of
the connection. See the table on the
right for the functions associated with
the connection speed LED.
Onboard Power LED
An Onboard Power LED is designated
LE2 on the serverboard. When this
LED is on, the system is on. Be sure
to turn off the system and unplug the
power cord before removing or install-
ing components. See the table at right
for more information.
5-12 SATA Ports
SATA Ports
Two SATA3 Ports (I-SATA0/1), col-
ored in white, and four SATA2 Ports
(I - SATA 2~ 5) are loc ated on the
serverboard. These ports provide
serial-link signal connections, which
are faster than the connections of
Parallel ATA. See the table on the right
for pin definitions.
(Connection Speed Indicator)
LED Color
Off
Green
Amber
Onboard PWR LED Indicator
LED Color
Off
Green
Green:
Flashing
Quickly
Pin Definitions
Pin#
Definition
1
Ground
3
TXN
5
RXN
7
Ground
5-22
LAN1/2 LED
Definition
No Connection or 10 Mb/s
100 Mb/s
1 Gb/s
LED Definitions
Status
System Off (PWR
cable not connected)
System On
ACPI S1 State
SATA Port
Pin #
Definition
2
TXP
4
Ground
6
RXP
Advertisement
Table of Contents
