Onboard Indicators; 5-10 Sata Ports - Supero SuperWorkstation 5038AD-T User Manual

5-9

Onboard Indicators

LAN1/2 LEDs
The Ethernet ports on the I/O back-
plane each have two LEDs. On each
port, one LED indicates activity while
the other LED may be green, amber
or off to indicate the speed of the
connection. See the table on the right
for the functions associated with the
connection speed LED.
Onboard Power LED
An Onboard Power LED1 is located
at LE1 on the serverboard. When this
LED is on, the system is on. Be sure
to turn off the system and unplug the
power cord before removing or install-
ing components. See the table at right
for more information.

5-10 SATA Ports

SATA Ports
Eight SATA 3.0 ports (I-SATA0-5,
A- SATA0/1) are provided on the
serverboard. The I-SATA 3.0 ports
are supported by the Intel Z87 PCH
chip while the A-SATA 3.0 ports are
provided by the ASMedia SATA con-
troller. See the table on the right for
pin defi nitions.
Chapter 5: Advanced Serverboard Setup
LAN1/2 LED
(Connection Speed Indicator)
LED Color Defi nition
Off No Connection, 10 or 100 Mb/s
Amber 1 Gb/s
Green 10 Gb/s
Onboard PWR LED Indicator
LED Status
Status Defi nition
Off System Off
On System on, or
System off and PWR
Cable Connected
SATA Port
Pin Defi nitions
Pin #
1
2
3
4
5
6
7
5-25
Defi nition
Ground
TXP
TXN
Ground
RXN
RXP
Ground