Sharp FO-DC500 Service Manual Supplement page 7

: Change/Addition
•
Soft switch function description
SW22 No. 1 ~ No. 3 Reserved
Set to "0".
SW22 No. 4 Line monitor up to Phase A
When set to "1", the line sound is monitored until phase A.
SW22 No. 5 Monitoring dial signal up to Phase A
Dial signals as well as facsimile signals are set to be monitored by set-
ting soft switch SW22 No.4 to "1" when it is active.
SW22 No. 6 ~ No. 8 Reserved
Set to "0".
SW60 No. 1 ~ No. 4 Reserved
Set to "1".
SW60 No. 5 ~ No. 8 Reserved
Set to "0".
SW66 No. 1, No. 2 Reserved
Set to "0".
SW66 No. 3 Reserved
Set to "1".
SW66 No. 4, No. 5 Cassette selection of separate page
The supply origin of a separate page is set.
SW66 No. 6 Reserved
Set to "0".
SW66 No. 7 Maximum size of input document
The maximum scan length can be switched.
SW66 No. 8 Reserved
Set to "0".
SW68 No. 1, No. 2 Distinctive ring pattern
The distinctive ring patter is set for country.
SW68 No. 3 Image length of TX transaction report
The size of images can be selected to attach to Transaction Report.
SW68 No. 4 Reserved
Set to "1".
SW68 No. 5, No. 6 Reserved
Set to "0".
SW68 No. 7 Reserved
Set to "1".
SW68 No. 8 Reserved
Set to "0".
SW78 No. 1 Reserved
Set to "1".
SW78 No. 2, No. 3 Reserved
Set to "0".
SW78 No. 4 Criterion of resolution when receiving
A standard resolution can be set for received images.
SW78 No. 5 ~ No. 8 Reserved
Set to "0".
SW86 No. 1 ~ No. 5 Reserved
Set to "0".
SW86 No. 6 Transferred fax image
By default, received fax images are printed by the machine. To set it to
print only when email forwarding fails, change this switch to "1".
SW86 No. 7 Insertion of Adobe's URL into E-mail
When sending emails with a PDF file attached, the URL of Adobe is
included in the body text. To prevent this, set this switch to "1".
SW86 No. 8 Reserved
Set to "0".
SW90 No. 1 Method of detecting CI frequency
If CI signal detection is interrupted by noise, switch to Firmware detec-
tion.
SW90 No. 2 Reserved
Set to "0".
SW90 No. 3 Reserved
Set to "1".
SW90 No. 4, No. 5 Reserved
Set to "0".
SW90 No. 6 Reserved
Set to "1".
SW90 No. 7 Reserved
Set to "0".
SW90 No. 8 Reserved
Set to "1".
– 6 –
FO-DC500U
FO-DC600U