Electro-Voice ELX112P Owner's Manual page 11

Amplifier Controls (cont')
FULL RANGE / WITH SUB
When switched to WITH SUB, activates a 100 Hz highpass for use with a subwoofer.
Always select WITH SUB when using the ELX112P/ELX115P with a subwoofer for
proper acoustic summation.
NORMAL / BOOST
The NORMAL/BOOST switch controls the tone of the loudspeaker. NORMAL works
best when the loudspeaker is used for vocal monitors or for speech. Boost works best
for music playback and applications that require more bass and treble boost.
LOUDSPEAKER LEVEL
Level control for adjusting the volume of the loudspeaker. The level control affects the
volume of both Input 1 and Input 2. To prevent distortion and clipping, the control should
affect the level of the link output connector.
LIMIT
The LED lights up when the loudspeaker is operated at its limit. Short-term blinking is
uncritical, because the integrated limiter keeps distortion under control. Constant light-
ing of the LED indicates that the sound is negatively affected. Reduce LOUDSPEAKER
LEVEL or INPUT LEVEL knobs to prevent limit.
INPUT SELECT
XLR/TRS 1 allows the signal from XLR/TRS Input 1 to pass to LINK OUTPUT. INPUT
1 LEVEL does not affect the level of LINK OUTPUT. The signal from RCA INPUT is
loudspeaker to act as a basic two-channel mixer that can send the mix to another loud-
speaker via the LINK OUTPUT connector.
LINK OUTPUT
XLR output connector to send the signal to another speaker or subwoofer. The output is
based on the selection made at the INPUT SELECT switch.
LOGO
The EV logo on the front of the loudspeaker lights up when the switch is set to ON.
Electro-Voice Live X Series Powered Owner's Manual 11