External Gpio Trigger Connection To G-Force Sensor - Panasonic Arbitrator 360 Hardware Installation Manual

External GPIO Trigger Connection to G-Force Sensor (Option)
Pin # Description
1 FLIP Out White
2 RIGHT Out Orange
3 LEFT Out Blue
4 REAR Out Red
5 FRONT Out Brown
6 REC Out Green
7 GND Yellow
8 GND Black
9 GND Gray
Cable Color
If you have 5 trigger inputs available for VPU, connect
Pin#1-5 with VPU trigger cable so that VPU can start
recording by the impact from any 8 directions with
indication on screen of SI and/or Control Panel.
If you have only 1 trigger input available for VPU, connect
to Pin #6 to start recording by the trigger regardless of
which direction the impact comes from.
TGS-3DP