Mounting The Upper V-Belt Guard; Mounting The Lower V-Belt Guard - Pfaff 1471 E1 Instruction Manual

8

Mounting the upper V-belt guard

.01.04
4
3
4
5
Fig. 8 - 04
8

Mounting the lower V-belt guard

.01.05
Fig. 8 - 05
Mounting and commissioning the machine
2
1
4
7
6
7
6
2
1
Screw position stop 1 onto the right half
of V-belt guard 2.
Attach both halves 2 and 3 of the
belt-guard with screws 4.
Slide the lower section 5 of the V-belt
guard with its slots over the heads of
retaining screws 6. Screw it on with
screws 7. Finally, tighten screws 6
through the holes.
Align belt-guard 1 in such a way that
both the motor pulley and the V-belt
run freely.
Tighten screws 2.
2
8 - 3