Settings
To connect to a Wi-Fi Network
1
Tap
>
> Settings > Networks
tab > Wi-Fi.
2
Tap the Wi-Fi switch
and begin scanning for available Wi-Fi
networks.
A list of available Wi-Fi networks will
•
be displayed. Secured networks are
indicated by a lock icon
3
Tap a network to connect to it.
If the network is open, you are prompted
•
to confirm that you want to connect to
that network by tapping Connect.
If the network is secured, you are
•
prompted to enter a password or
other credentials. (Ask your network
administrator for details).
Tap
to access the following options.
•
Connect by WPS button: Set up a
•
connection to a WPS (Wi-Fi Protected
Setup) router or other equipment.
Connect by WPS PIN: View the PIN
•
used by your device to set up a PIN-
secured connection to a Wi-Fi router or
other equipment.
Add network: Add additional networks
•
66
•
to turn it on
•
•
.
4
•
•
•
•
by entering SSID and other settings.
Wi-Fi Direct: Connect to other Wi-Fi
Direct devices.
Advanced Wi-Fi: Configure additional
settings.
Interactive tutorial: Learn about setting
up and using Wi-Fi networks, and other
settings.
The Status Bar at the top of your screen
will display an icon that indicates your
Wi-Fi connection status.
TIP
If you are not in range of a Wi-Fi
network and use a network connection,
additional data charges may apply.
Turn off Wi-Fi when you're not using it
to extend the life of your battery.
NOTE
Access to the Internet and a wireless
router required. As an added
convenience, AT&T has shipped certain
smartphones with Wi-Fi enabled as a
default setting. Leaving Wi-Fi enabled
when not connected to a Wi-Fi network
may affect battery charge. Qualifying
data plan required.
This device supports WEP, WPA/