LG G3 Getting Started

Setting Up Your Phone
Welcome to Verizon Wireless. You're now part
of a growing movement that' s about speed,
signal and strength. This guide will show you
how to set up and use your phone, access
special features, and find help.
Get to Know
Step 1. Remove the Back Cover
Insert your fingernail into the slot located on

Your Phone

the lower left of the back cover and lift the
cover up gently.
Optional: Replace the SIM Card
The SIM card is pre-installed in your phone. If
you need to replace your SIM card, locate the
slot for the SIM card (the lower of two slots
under the back cover) and gently slide the SIM
card out to remove it.
Optional: Insert the microSD Card Step 3. Replace the Back Cover
If you have a microSD card, slide it into the Place the back cover over the back of the
microSD card slot (the upper of the two slots phone, and then press down along the edges
to secure the cover.
under the back cover).
NOTE: The microSD card is sold separately.
Step 4. Charge the Phone
Your phone comes with a USB/Charger
Adapter and a USB cable that connect
Step 2. Insert the Battery
together to charge your phone. Before turning
on your phone, charge it fully.
Insert the battery, making sure to align the
gold contacts. Press down gently to secure
WARNING! Please use only an approved charging accessory
to charge your phone. Improper handling of the USB/
the battery.
Charger Port, as well as the use of an incompatible charger,
may cause damage to your device and void the warranty.
Front Camera Proximity Laser Detection Rear Camera
Sensor Auto-focus
Earpiece
Power/
Lock
Key
NFC
Touch
Point
Back Recent
Key Apps Key
Speaker
Microphone Home Key
USB/Charger Port
microSD
Card Slot
NOTE: Devices and software are constantly evolving—the
screen images and icons you see here are for reference
only.
SIM Card Slot
Using Your Phone
Turning Your Phone On/Off OR
To use a shortcut, swipe the shortcut
To turn your phone on, press and hold
icon at the bottom of the screen in any
the Power/Lock Key for a couple of
direction. The screen will unlock and open
seconds until the screen lights up.
the app.
To turn your phone off, press and hold
Unlocking the Screen Using the Knock
the Power/Lock Key until the Phone
Code Feature
options are displayed. Tap Power off
LED
You can unlock the screen when the screen is
Flash
> OK.
off by tapping the correct area and sequence.
Setup Wizard
1. > > From the Home screen,
Follow the onscreen instructions to quickly set
Volume tap: Apps > Settings > Lock screen.
Keys up your phone and email accounts.
Tap Select screen lock > Knock Code.
2.
3. Follow the instructions to create your
Turning the Screen On
unlock sequence, as well as a backup PIN
Turning the Screen On Using the Power/
in case you forget your unlock sequence.
Lock Key
To turn the screen on, press the Power/Lock
Selecting the Home screen mode
Key once and the screen will light up.
You can select one of the two modes: Home
Turning the Screen On Using the KnockOn and EasyHome. When you first turn on your
Feature phone it will be set to Home mode and the
instructions in this guide are written based on
Quickly double-tap the center of the screen to
the Home mode.
turn the screen on.
Unlocking the Screen > > To change mode, tap:
Apps > Settings > Home screen > Select Home.
Using the Power/Lock Key
1. Press the Power/Lock Key to turn on Home mode — Standard experience for users
your screen. Your Lock screen will who are familiar with Android. If selected, your
Home screen will look like this:
appear.
2. Swipe in any direction to unlock it.
EasyHome mode — Simplified and easier
experience for the first time smartphone
user. If selected, your Home screen will look
like this: