Advertisement
INSTALLATION - OPERATING & MAINTENANCE MANUAL
REMOTE CONTROL
The remote control enables the user to set all unit operating parameters; these parameters are shown on a display to facilitate
programming. The remote control runs on two 1,5 V batteries, monopole type R 03 AAA and optimal operation is guaranteed up to
7 meters from the unit
2
3
6
7
11
13
15
NAMES AND FUNCTIONS OF THE PARTS
17
4
1
5
9
8
10
12
14
16
1 POWER ON/OFF
2 SLEEP
Press this button for the night mode operation. The
temperature setting is changed automatically in
comformity with the set time.
3 TIMER
Press this button for adjusting the timer (1 ¸ 9 ore). Use
this button for quick setting of the operating time.
4 TEMP/TIME
Press this button to set the temperature and time
(increase)
5 TEMP/TIME
Press this button to set the temperature and time
(decrease)
6 MODE
Press this button to set the various modes of operation
(automaric, cooling/heating, dehumidifying and fan).
7 DIREC.
Use this button to adjust the airflow in a vertical direction
(automatic, direction 1, direction 2, direction 3, direction
4, direction 5).
8 AIR CLEAN
Press this button to generate negative ions and to clean
the air in the room.
9 SPEED
Press this button to select the fan speed (automatic, low,
medium, high).
10 AUTO
Press this button to set the airflow direction in the
automatic mode.
11 OFF (timer)
Set the time for when fancoil operation should stop.
12 ON (timer)
Set the time for when fancoil operation should start.
13 DEL (timer)
Use this button to delete the timer setting.
14 ENT (timer)
Use this button to enter the timer setting.
15 CLOCK
Use this button to set the current time.
16 ACL
Use this button to erase all the settings made by the user
in order to return to original setting.
17 SIGNAL TRANSMITTER
The control signals are sent to the fancoil from this
transmitter.
2 6
Page 5
Advertisement
