Ta Function (Traffic Announcement); Activating/Deactivating The Ta Function - Pioneer DEH-P9200R Operation Manuall

Using the RDS Functions
TA Function
The TA (Traffic Announcement standby) function lets you receive traffic announcements
automatically, no matter what source you are listening to. The TA function can be activat-
ed for a TP station (a station that broadcasts traffic information) or an EON TP station
(a station carrying information which cross-references TP stations).

Activating/Deactivating the TA Function

1. Tune in a TP or EON TP station.
The TP indicator ("
2. Activate the TA function.
The "TRFC" indicator lights, indicating that the tuner is waiting for traffic announcements.
Repeat the preceding operation when no traffic announcement is being received to deacti-
vate the TA function.
Note:
• You can also switch the TA Function ON/OFF in the Function Menu.
• The system switches back to the original source following traffic announcement reception.
• The TA function can be activated from sources other than tuner if the tuner was last set to the FM
band but not if it was last set to the AM band.
• In the Built-in CD player or Multi-CD player mode, the tuner automatically seeks out the TP station
with the strongest signal in the current area 10 seconds after the TP indicator
from the display. (During seek operation, the TP indicator
• Only TP or EON TP stations are tuned in during the Seek Tuning mode when the "TRFC" indicator
is ON.
• Only TP or EON TP stations are stored by BSM when the "TRFC" indicator is ON.
29
") lights when the tuner is tuned to a TP station or an EON TP station.
Hold for 2 seconds "TRFC"
(
"
( )
" " flashes.)
" "
)
" disappears