Remote Controller And Care; Using The Remote Controller; Switching The Mode - Pioneer DEH-P9200R Operation Manuall

Remote Controller and Care

Using the Remote Controller

This product is equipped with a remote controller for convenient operation.
• Point the remote controller in the direction of the front panel to operate.
• When the remote controller is not in use, attach it firmly to the provided Mounting base.
Precaution:
• Do not store the remote controller in high temperatures or direct sunlight.
• The controller may not function properly in direct sunlight.
• Do not let the remote controller fall onto the floor, where it may become jammed under the brake or
accelerator pedal.

Switching the Mode

When this product is connected to a DSP, change the remote controller setting. While
pressing the BAND button, press the FUNCTION button on the remote controller to
change to the ADD ON DSP mode. To return to the previous mode, press the AUDIO but-
ton while pressing the BAND button on the remote controller. If you do not connect a DSP
to this product, do not switch to the ADD ON DSP mode.
Precaution:
• If you do not set the remote controller as the above, correct operation will not be possible by the
remote controller.
• Reset the remote controller when you change batteries.
11