Setting The Clock; Date Entry - E-Bench KH 2024 Operating Instructions Manual

one after the other.
• At one minute intervals, the actual time is checked with
the alarm setting if this is activated. (for details see
Section 2.8 "Activated alarm setting").

2.2 Setting the clock

• Press »MODE« once if the device is in time display
mode.
• Press »MODE« twice if the device is in radio mode.
• The display shows 'CLOCK'.
• The time display starts to flash and the day of the
week disappears from the LCD.
• The seconds display continues to update every second.
• Press »UP« to increase the time setting by 1 minute.
Keep the »UP« button pressed to change the time quickly
in 10 minute increments.
• Press »DOWN« to decrease the time setting by 1 minute.
Keep the »DOWN« button pressed to change the time
quickly in 10 minute decrements.
• If within 15 seconds there has been no further setting
made, then the current settings are activated/stored
and the device goes once more into automatic operation.

2.3 Date entry

• Press »MODE« twice if the device is in time display
mode.
• Press »MODE« three times if the device is in radio
mode.
• If the device is already in "Setting the clock" mode as
described in Section 2.2, you can enter "Date entry"
mode by pressing the »MODE«
• The existing set date DD.MM.YY (Day.Month.Year)
flashes, then the LCD shows a steady display of 'DATE'
as well as the day of the week.
• Press »UP« or »DOWN« in order to change the existing
setting (by a day at a time). Keep the »UP« or »DOWN«
button pressed to activate fast forward or fast backward
adjustment (by 10 days at a time). The day of the week
display is automatically activated as soon as the date
display is steadily illuminated again.
• If within 15 seconds there has been no further setting
made, then the current settings are activated and the
device goes back into automatic operation.
8
button once.