Display Mode - E-Bench KH 2024 Operating Instructions Manual

• Table of frequency bands and steps for each band. :
Band Frequency range
FM 87.5 - 108.5 MHz
SW 5.85 -15.6 MHz
MW 530 -1656 kHz
LW 144 - 281 kHz
2.12 Tuning short wave (SW)
Set the slide switch to LX if the reception of the station
is strong enough. Set the slide switch to RX to improve
the reception of weak short wave stations.
2.13 Preset search (MEMORY SCAN)
• If the radio is on, press »MEM. SCAN«
through the 10 preset stations.
• The search process starts at the next preset or MEM-1
if no particular preset has been selected.
• The search process is stopped after 5 seconds for each
station.
Frequency steps
50 kHz
5 kHz
9 kHz
1 kHz
once to go
13
• Press »SNOOZE /RADIO OFF« to terminate the preset
search.

2.14 Display mode

• In time display mode (with the radio switched off),
press »ALT. DISP.« once. The Time and day of the week
displays are not shown, the current displays are made
using 'CLOCK', 'DATE' and 'CITY'.
By the appropriate number of presses you can select
which display appears in addition to the time display.
If the radio is switched off, the selected displays appear
one after the other.
Display LCD display (right top in display)
Time display only Steady 'CLOCK' display only
Time + date Steady 'CLOCK' + 'DATE'
display only
Local time Steady 'CLOCK' + 'CITY'
and world time display only
Local time Steady 'CLOCK' + 'DATE' + 'CITY'
+date +world time display only