Table of Contents
Advertisement
3. Cleaning
4. Positioning the appliance
4.1. Installation instructions
IMPORTANT
Please follow the installation details below
carefully Guarantee is valid for products installed
as described only.
1. The refrigerator must be level both directions
2. There should be 20 mm clearance to the wall
3. Ventilation must be provided as shown in
alternatives A, B, C or D (fig 2-3)
4. The ventilation duct must at least measure
105 mm x the width of the refrigerator
5. Only the entire cooling unit must project into
the duct as shown
6. Air passing through the duct must not be
preheated by any source of heat
7. Ventilation grills, if used, must
openings of at least 200cm
During installation, please ensure the mains
plug is accessible at all times.
have
2
each
- Quick Links:
- Temperature Regulation
Hide quick links:
Advertisement
Table of Contents
