Media Player Settings; Autoplay - Alfa Romeo Blue & Me Nac User Manual

} To set the GPRS code using voice in-
teraction, proceed as follows:
ô
Press , pronounce "Settings" and
then "Connection code".
Blue&Me™ Nav will prompt "The
current GPRS connection code is val-
ue . To change code say a number from
1 to 9 or say "Default". To disable
the connection code say "Disable".
To change the code, say a number
from 1 to 9 or say "Default". To dis-
able the connection code say "Dis-
able". (In previous text, value is the
GPRS connection code set at that mo-
ment).
After setting the new connection code,
Blue&Me™ Nav will say "The Con-
nection Code is set to value " (here val-
ue corresponds to the new GPRS code
set).
58 58

MEDIA PLAYER SETTINGS

Autoplay

When the Autoplay option is on,
Blue&Me™ Nav will start to play the au-
dio files on your USB device as soon as you
fit the electronic key into the ignition device.
Once you activate this option, the first time
you use the player, playback will start auto-
matically.
The Autoplay option shall be disabled
(when required) before connecting your USB
device to the USB port and building or up-
dating the media library.
?
To change Autoplay setting using
manual interaction, proceed as fol-
lows:
Open the Main Menu, select SET-
TINGS, MEDIA PLAYER, AU-
TOPLAY and then press SRC or
To activate Autoplay, select AUTO-
PLAY ON and press SRC or
deactivate Autoplay select AUTO-
PLAY OFF and press SRC or
} Or, using voice interaction:
ô
Press and pronounce "Autoplay
on" or "Autoplay off".
Note
If you change the Autoplay settings af-
ter connecting the USB device, new setting
will be activated the next time you connect
a different USB device (or the same USB de-
vice with updated track library).
ß
.
ß . To
ß .