Managing User Data - Alfa Romeo Blue & Me Nac User Manual

Notes
❒ You are only required to pair your mobile
phone a single time.
❒ You can pair up to five mobile phones, to
be used one at a time.
❒ On your paired mobile phone, the Blue-
tooth ® setting must be turned on in or-
der to connect your mobile phone with
Blue&Me™ Nav.
❒ Before transferring your mobile phone
contacts to the hands-free system, make
sure that each contact first and last name
is unique and distinctly recognizable so
that the voice recognition system will
function properly.
❒ The system will download only valid con-
tact entries. A valid contact entry must in-
clude both a name and at least one
phone number.
❒ If you would like to re-pair your mobile
phone, delete the old pairing relationship
first. During this operation all user data will
be deleted. To delete the old pairing rela-
tionship, use the menu option USER DA-
TA, DELETE USERS. On your mobile
phone, delete "Blue&Me" from the list
of Bluetooth ® devices following the spe-
cific instructions for your mobile phone (re-
fer to your mobile phone owner's manu-
al).
❒ If you download a phonebook with a con-
tacts list including more than 1000 con-
tacts, the system may operate slower
than expected and voice recognition of
the names in your phonebook may de-
grade.
❒ If the pairing relationship is accidentally
deleted, the pairing procedure shall be re-
peated.

MANAGING USER DATA

You can make adjustments to the user da-
ta used by the hands-free phone system.
Specifically, you can reset all user data for
paired phones, delete the phonebook or re-
set both user data and phonebook down-
loaded. In this way the system is brought
back to initial conditions. You can also down-
load either the phonebook or single contacts
from your mobile phone to the system, if
you chose not to download the phonebook
during the phone pairing procedure. You can
make adjustments to the user data used by
the system using the option USER DATA.
?
To open the USER DATA menu us-
ing manual interaction, proceed as fol-
lows:
Press ß to open the Main Menu, then
select SETTINGS by pressing SRC
or ß .
Select USER DATA and then press
SRC or ß .
51 51