Points Of Interest - Alfa Romeo Blue & Me Nac User Manual

After entering the destination Road/Street,
Blue&Me™ Nav will ask you if you wish
to enter a house number or navigate to-
wards the address currently set. The avail-
able options are:
❒ ENTER NUMBER
❒ START NAVIGATION
?
Using manual interaction:
Select the required option using the "N" or
"O" keys and press SRC or
ß
}
Or using voice interaction, say "En-
ter number" or "Start".
If you choose Start navigation, the sys-
tem will display the full address and ask you
to confirm in order to begin navigation. If
the address entered is ambiguous, the sys-
tem will prompt you to choose between the
possible alternatives.
If you choose Enter number, you must
enter the house number of the chosen des-
tination address.
?
Proceed as follows to enter the house
number:
Scroll through the numbers in the fourth row
(see fig. 4) using the "N" or "O" keys
until the required numbers are displayed on
the third row. Press SRC or
number. Proceed in the same way to select
the following numbers until the full house
number is displayed in the second row.
Press the "N" key to delete the last num-
ber entered. The system will ask you to con-
to confirm.
firm the deletion by pressing SRC or
you are using voice interaction, press
say "Delete".
Press the "O" key once to finish entering
the house number displayed. The system will
ask you to confirm by pressing SRC or
If you are using voice interaction, press ' and
say "OK".
Once you have entered the house number
Blue&Me™ Nav will display the full ad-
dress and ask for confirmation in order to be-
gin navigation. If the address entered is am-
biguous, the system will prompt you to
choose between the possible alternatives.
Note
While entering the house number, both num-
bers and letters are shown on the fourth
row (see fig. 4) of the reconfigurable mul-
tifunction display; in the event of future map
software updates, these will allow you to
ß to select the
set particular types of numbering that require
the use of alphanumerical characters.

Points of interest

This function gives you access to a file con-
taining information on the location of use-
. If
ß
ful destinations of general interest divided
ô and
by category (e.g.: hotels, restaurants,
chemists, airports, railway stations, autho-
rised workshops etc.).
To use this function, your USB device with
ß .
the preloaded map software must be con-
nected to the USB port on the car.
?
To select a Point of interest using man-
ual interaction:
Activate the main Menu, select the
NAVIGATION option and then
press SRC or
Select the option NEW DESTINA-
TION by pressing SRC or
Select POINTS OF INTEREST and
press SRC or
ß .
ß .
to confirm.
ß
41