Jump Thread Trimming On/Off; Jump Thread Trimming Threshold; Jump Thread Trimming Threshold (Length); Thread Trimming Position - Janome MB-4 Instruction Manual

Janome MB4 Embroidery Machine Instruction Manual
12
13-A
13-B OFF
14 0.8
www.aaasewing.com
ON
3
mm
mm

[12] Jump thread trimming ON/OFF

If you wish to trim jump threads automatically, press
the right arrow button
Press the left arrow button
thread trimming.
Press the ENTER button to register the new setting or
press the upward arrow button
setting.
[13-A]

Jump thread trimming threshold

If you insert jump codes when creating a custome
design embroidery pattern using a digitizing software,
you can adjust the position of jump thread trimming by
setting the number of jump codes.
The machine will trim the jump thread automatically
after the specified number of jump codes.
Press the right or left arrow button
the number of jumps.
The default setting is 3 and adjustable range is from 1
to 8.
The lower the number, the shorter the jump thread
trimmed.
NOTE:
Turn off the setting [13-B] when using this function.
Press the ENTER button to register the new setting or
press the upward arrow button
setting.
[13-B]

Jump thread trimming threshold (length)

If you do not have a digitizing software, you can ajust
jump thread trimming by length.
Press the right or left arrow button
minimum length of jump thread to cut. The machine
will automatically cut jump threads longer than the
length selected.
The adjustable range is from 1 mm to 30 mm.
NOTE:
Set the jump code number to 8 when using this
function.
Press the ENTER button to register the new setting or
press the upward arrow button
setting.

[14] Thread trimming position

If the machine fails to trim the threads properly, adjust
the needle drop position where the threads being
trimmed.
Press the right or left arrow button
distance between the thread trimming position and
the last stitch of the pattern section or select [OFF] to
turn off the function.
The adjustable range is from 0.5 to 1.0.
Press the ENTER button to register the new setting or
press the upward arrow button
setting.
62
MB-4 Embroidery Machine
to indicate [ON].
to disable the jump
to go to the next
to adjust
to go to the next
to set the
to go to the next
to set a
to go to the next
MB4 Owners Manual/ User Guide