Page 1
ADDRESS Automatic / Quartz Analogue Further information or instructions can be obtained from the Accurist Helpline during office hours Monday to Friday. Watch Setting Instructions Including 8N24, YM22A, GP00 / GP01, 6P23 / 6P20 / 6P21 / JR00 / Miyota...
How to use these instructions This booklet contains setting instructions for the Accurist Quartz Analogue series of watches. Each section describes a particular calibre (also called watch movement) which offers a unique set of functions and features. As such, it is necessary to identify the correct calibre of your watch before proceeding to the appropriate section (see diagram opposite).
The BritishRealTime Project • www.britishrealtime.com The BritishRealTime clock has been designed and developed to replace our sponsorship of the British Telecom speaking clock. Having been sponsors of the speaking clock for over 22 years and having received 3.5 billion calls we felt that it was time for a change.
Page 6
Filming started in September 2008 at The International Jewellery Fair, London and since then over 6,000 people have been filmed across the country including Lakeside, Cardiff, Sheffield, Glasgow, Gateshead, Dudley, Manchester, and Croydon. Filming will continue well into 2009 as the clock continues to grow incorporating more and more faces of the real British public to create BritishRealTime.
Quartz Analogue Operating Instructions Position A Position B...
Page 8
Please note: The second hand will not start moving until the crown has been returned to Position A. To set the time: 1. Gently pull out crown to Position B. 2. Turn crown either way to correct time. 3. Push in crown to Position A. To set your watch accurately visit www.britishrealtime.com...
Page 9
Quartz Analogue Operating Instructions continued... For Calendar Models FRI 12 Position A Position B Position C...
Page 10
To set the calendar/date: 1. Gently pull out crown to Position B. 2. Turn crown anti-clockwise to adjust date, clockwise to adjust the day. 3. Push in crown to Position A. Note: The Day will start to change at 11.25 p.m. and complete its change by 12 0’ clock midnight.
Page 11
Quartz Analogue Operating Instructions continued... For Alarm Models Alarm on / off button Position A Position B Position C Alarm indicator hand...
Page 12
To set the alarm: 1. Gently pull out crown to Position B. 2. Turn crown clockwise to adjust the alarm indicator hand. 3. Push in crown to Position A. To switch alarm on, gently pull out Alarm On/Off Button. To switch alarm off, depress the Alarm On/Off Button. Note: The alarm will sound for 15 seconds, before automatically switching itself off.
8N24 - Automatic Skeleton Movement Operating Instructions Automatic Watches, otherwise known as the watch to wind itself. Wearing the self-winding watches, should be worn watch on your wrist for a further 6 hours for at least 6-8 hours a day this is...
Page 14
To wind the mainspring: 1. Ensure crown is in Position A (Normal time mode) 2. Turn crown clockwise approximately 15 – 20 times. To set the time: 1. Gently pull out crown to Position B. position A 2. Turn crown either way to correct time. position B 3.
GP00 / GP01 Retrograde Operating Instructions Date window (GP00) To set the time: Date window (GP01) 1. Gently pull out crown to Position C. 2. Turn crown either way to correct time. Position C 3. Push in crown to Position A. To set your watch accurately visit www.britishrealtime.com Date window at 12-hour position...
Page 16
To set the calendar/date: 1. Gently pull out crown to Position B. 2. Turn crown clockwise to adjust date. 3. Push in crown to Position A. 24 Hour / Dual Time hand at 6-hour position. To set 24 HR Hand / Dual Time (Retrograde): 1.
YM22A Operating Instructions To set the time: 1. Gently pull out crown to Position C. Position C 2. Turn crown either way to correct time. 3. Push in crown to Position A. To set your watch accurately visit www.britishrealtime.com Position A Position B To set the date: (BR) Bottom Right Button...
Page 18
To set the Dual Time: 1. Gently pull out crown to Position C. 2. Push the Bottom Right (BR) Button to set dual time. Press and hold BR Button to quick change the dual time hands. 3. Push in crown to Position A. Please ensure you set up the dual time before you set up the alarm.
6P23 Operating Instructions 24 hour dial Position B Position C Position A Date dial...
Page 20
To set the date: To set the time: 1. Gently pull out crown to Position B. 1. Gently pull out crown to Position C. 2. Turn crown anti-clockwise to adjust date. 2. Turn crown either way to correct time. 3. Push in crown to Position A. 3.
6P29 / 6P20 / 6P21 Operating Instructions Date Date position C position C position A position A position B position B 24 hour display Age of the moon...
Page 22
To set the time/day 1. Gently pull out crown to Position C. 2. Turn crown either way to set the time. 3. Push in crown to Position A. To set your watch accurately visit www.britishrealtime.com To set the day of the week 1.
Page 23
To set the date 1. Gently pull out crown to Position B. 2. Turn crown anti-clockwise to adjust date. 3. Push in crown to Position A. To set the moon age: Note: More accurate settings can be made during a new moon (when the centre of the moon aligns to ‘0’...
Page 24
To read the moon age: Note: The age of the moon is determined by the period between each new moon. This period is approximately 29.5 days. The moon dial can be used as a guide to moon phase and tides. New Moon First quarter moon Full moon...
Page 25
For Electro-Luminescent Models Electro-Luminescent is state-of-the-art technology which allows you to read your watch under any lighting conditions. To operate depress the Electro-Luminescent Button. Note: The battery life will be affected by the number of times the E L display is operated;...
JR00 Operating Instructions Date Hand Minute Hand Hour Hand Normal Position 24 Hour Hand Second Hand Position A Position B Retrograde Day Hand...
Page 27
To set the time: 1. Pull the crown out to position B. 2. Turn the crown to set hour and minute hands. To set your watch accurately visit www.britishrealtime.com To set the date: * Please do not set the date between 9.00pm and 1.00am 1.
Page 28
Please do not stop when the day Please set the day hand just positioned hand is in this position on the day scale...
Page 29
To set the day: * Please do not set the day between 11.00pm and 3.00am. 1. Pull the crown out to position A. 2. Turn the crown clockwise very slowly to set the day. * Please do not stop when the hand is between the day as shown in fig 1. * If the day hand stops at a position like in fig 1.
Miyota Watch Movement Operating Instructions Minute hand 24 hour hand Normal 1st Position 2nd Position 24 hour hand Crown Position Date Date position may be located at different position depends on model.
Page 31
Setting the time: 1. Pull the crown out to the 2nd position. 2. Turn the crown to set hour and minute hands. 3. When the crown is pushed back to the normal position, second hand begins to run. Setting the date: 1.
Care of your watch Avoid temperature extremes 1. Avoid leaving your watch in direct sunlight or in extremely warm conditions for long periods of time: this will cause malfunctioning and shorten the life of the battery. 2. Do not leave your watch for long periods of time in extremely cold places; this may cause your watch to gain or lose time.
Page 33
Avoid strong shocks 1. This watch will withstand the bumps and jars normally incurred during sports activities. 2. Avoid dropping your watch on the ground or otherwise imparting severe shock to it. Avoid strong magnetic fields 1. Keep your watch away from strong magnets 2.
Page 34
2. Avoid materials such as gasoline, benzene, paint thinner, alcohol, spray cosmetics, nail polish, nail polish remover, adhesives or paint. Periodic inspection 1. A regular 4 to 5 years service by an authorised Accurist technician will ensure trouble free operation. 2. Refer to the After Sales Service section for details.
Page 35
IMPORTANT 1. Keep the batteries out of reach of infants and small children. Should accidental ingestion occur consult a doctor immediately. 2. Do not attempt to replace the battery yourself as this invalidates your guarantee. Keep you watch clean Wipe off any moisture that adheres to the case, glass or band with a soft, clean cloth.
EU states may return their used electrical and electronic equipment to designated collection points free of charge. Equally return your product to an Accurist stockist or Accurist headquarters, who will see to the products disposal. Please contact your authority for further details.
Page 37
Disposal information for business users EU Countries Please contact your Accurist dealer who will inform you about the ‘take back’ of products. Non EU Countries If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal.
Bracelet Adjustment The bracelet requires a small adjustment and the model has a Z-type clasp. 1. Depress the end of the spring bar on the centre clasp with a pin. 2. Relocate the spring bar in an alternative hole.
Page 39
The bracelet requires a significant adjustment or the model does not have a Z-type clasp. 1. Use the enclosed wrist gauge to measure and mark the size of your wrist. 2. Return the completed wrist gauge with your watch. 3. Follow the instructions in the After Sales Service section to return your watch for adjustment.
Resistance to water INDICATIONS ON DIAL OR CASEBACK LIGHT SPRAY, DIAL CASEBACK PERSPIRATION, SWIMMING LIGHT RAIN ETC... BATHING, ETC... WATER RESISTANT WATER RESISTANT WATER RESISTANT 50M (5 ATM) WATER RESISTANT WATER RESISTANT 100M (10 ATM) WATER RESISTANT WATER RESISTANT 150M (15 ATM) AND DEEPER...
Page 44
DIVING: SKIN DIVING: SCUBA DIVING: WHEN USING A DIVING WITHOUT DIVING WITH HELIUM ENRICHED AN AIR TANK AN AIR TANK ENVIRONMENT...
Page 45
Resistance to water IMPORTANT - NEVER PULL OUT THE CROWN WHEN THE WATCH IS WET. • Tighten screwlock crown completely. • Water resistance is not a permenant property. We strongly recommend you return your watch for resealing every 4 - 5 years and/or when changing batteries.
The terms of this guarantee provide rights that are in addition to your statutory rights and do not in any way limit or otherwise affect those statutory rights. Your Accurist watch is guaranteed for 3 years from the date of original retail purchase against any malfunction of the watch movement due to defective materials or workmanship.
Page 47
We will, at our option, repair or replace your watch with a model of similar appearance or value. After the expiry of this guarantee the Accurist Service Centre and International Service Agents are at your complete disposal. We will be pleased to quote for routine maintenance, oiling or repair of your watch by our factory trained staff of experts.
After Sales Service Each Accurist watch comes with a lifetime commitment to quality after sales service. Our award winning customer service team are dedicated to providing expert servicing from bracelet adjustments to full overhaul. We pride ourselves in identifying our customer's requirements and reacting to their individual needs.
Accurist Service Centre address listed on page 40. 3. Enclose a cheque, postal order or MasterCard/Visa payment for £5.00 payable to Accurist Service Centre. This covers return postage and insurance for loss or damage whilst in transit or undergoing repairs. No liability for loss or damage will be accepted without this remittance.
Page 50
I enclose: cheque postal order credit card, Accurist Watches Limited Asher House debit card (issue no. ) payment for £5.00 For all other countries Blackburn Road West Hampstead Card No: London, NW6 1AW 1. Return the watch with payment to your nearest International service agent (see page 40).