Advertisement
Quick Links
Advertisement
Related Manuals for Accurist 7024474
Summary of Contents for Accurist 7024474
- Page 1 Instruction Guide 2 year Guarantee IA05A...
- Page 2 Service and Repairs Your ACCURIST watch is guaranteed against defects in materials and workmanship for a period of 2 years from the date of purchase. During this period, we will exchange or repair, at our discretion, any defective components free of charge.
-
Page 3: Water Resistance
Water Resistance If your watch is water resistant, it will clearly state “Water Resistant” or have a static water pressure indication (e.g. “30/50/100/200 metres”) on the dial and/or case back. If it is not marked as water resistant, it should not be allowed to come into contact with water or be worn in conditions that could expose it to moisture (e.g. - Page 4 Digital Instructions System Settings Time/Date Settings...
- Page 5 Digital Instructions Using the backlight feature 1. Press ‘A’ button to activate the backlight for 3 seconds. System settings: Using the night feature 1. Hold down ‘C’ button and press ‘B’ button to enter the system settings mode. 2. Press ‘D’ button to select “NGT” on/off. •...
- Page 6 Digital Instructions Setting the time 1. When in real time mode, hold down ‘B’ button to enter time setting mode. 2. When the whole display is flashing, press the ‘D’ button to se- lect the chime hourly function on/off, then press the ‘C’ button. 3.
- Page 7 GUARANTEE PLEASE USE BLOCK CAPITALS NAME ADDRESS POST CODE DAYTIME TELEPHONE NUMBER IMPORTANT This guarantee slip should be retained by the owner of the product and should be sent to Timeproducts (UK) Ltd. together with the product and £12 to cover the handling and postage when service under Guarantee is required.
-
Page 8: Date Of Purchase
GUARANTEE DATE OF PURCHASE: Retailers stamp if required or full name and address: Please attach the receipt or proof of purchase; failure to attach these may invalidate this Guarantee. This Guarantee does not affect your statutory rights. IA05A/07-2017... - Page 9 Digital Instructions Alarm Settings Mode Stopwatch Mode...
- Page 10 Digital Instructions Setting the alarm feature • To set the alarm, press the ‘B’ button repeatedly until the alarm display is shown, then press the buttons in the following sequence. Note: the watches covered in this manual have 3 individual alarms labelled AL 1, AL 2 and AL 3. 1.
- Page 11 Digital Instructions Using the stopwatch feature conitnued • Split time measurement 1. Press the ‘D’ button to start the counter, then press the ‘C’ button to split the timing. 2. Press the ‘D’ button to pause and resume counting. * The stopwatch can record up to 10 laps. If the counter is still running after the maximum 10 laps have been recorded, any additional elapsed time will be added to the final lap time.
- Page 12 Digital Instructions Using the countdown feature continued 4. To reset the countdown, the timer must first be stopped, then press the ‘C’ button to enter the countdown settings mode and then the ‘B’ button to reset the timer to the chosen countdown duration.
- Page 13 Analogue Instructions Setting the time 1. Pull the crown out to position ‘2’. 2. Turn the crown until the hands show the correct time. 3. Return the crown to position ‘1’.
- Page 14 World Time Zone Reference Table City Code City Country Time Difference Coordinated Universal Time London =00:00 UTC Paris France +01:00 UTC Rome Italy +01:00 UTC Cairo Egypt +02:00 UTC Moscow Russia +03:00 UTC Dubai +04:00 UTC Karachi Pakistan +05:00 UTC New Delhi India +05:30 UTC...