Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Accurist MS612B
Summary of Contents for Accurist MS612B
- Page 1 Instruction Guide IA03...
-
Page 2: Service And Repairs
Service and Repairs Your ACCURIST watch is guaranteed against defects in materials and workmanship for a period of 2 years from the date of purchase. During this period, we will exchange or repair, at our discretion, any defective components free of charge. -
Page 3: Water Resistance
Water Resistance If your watch is water resistant, it will clearly state “Water Resistant” or have a static water pressure indication (e.g. “30/50/100/200 metres”) on the dial and/or case back. If it is not marked as water resistant, it should not be allowed to come into contact with water or be worn in conditions that could expose it to moisture (e.g. - Page 4 2 eye and 3 eye chronograph with date 1 2 3 1 2 3 1 2 3...
- Page 5 2 eye and 3 eye chronograph with date Resetting the chronograph function: • Before setting the time please check that all chronograph hands are at the “0”/12 o’clock position. • To reset the hands to the “0”/12 o’clock position press the buttons on your watch in the following sequence: 1.
-
Page 6: Setting The Time
2 eye and 3 eye chronograph with date Setting the time: * The chronograph measurement must be stopped before the time can be set. 1. Pull the crown out to position ‘2’. 2. Turn the crown clockwise until the previous date is displayed. - Page 7 2 eye and 3 eye chronograph with date Using the stop watch/chronograph feature: * The chronograph measurement can time up to 60 minutes. • Standard measurement: 1. Press ‘A’ to start the chronograph timing, then press ‘A’ to stop the timing. 2.
- Page 8 2 eye and 3 eye chronograph with date Using the stop watch/chronograph feature continued: • Split time measurement: 1. Press ‘A’ to start the timing, then press ‘B’ to split the timing. 2. Press ‘B’ to release the timing as many times as required.
- Page 9 3 eye chronograph with day and date HOUR REMOTE CHRONOGRAPH SECONDS * Do not attempt to set the day between 11.15 PM and 6.00 AM as the day/date change cycle is already in progress. * The chronograph measurement can time up to 4 hours, 59 minutes and 59 seconds.
-
Page 10: Setting The Date
3 eye chronograph with day and date Setting the time: 1. Pull the crown out to position ‘3’ and adjust the hands to the desired time. 2. Push crown back to position ‘1’. Setting the date: 1. Pull the crown out to position ‘2’. 2.