Page 6
A wrench or a key left attached to a rotating part GENERAL SAFETY RULES of the power tool may result in personal injury. e) Do not overreach. Keep proper footing and balance WARNING! at all times. Read all instructions This enables better control of the power tool in Failure to follow all instructions listed below may result unexpected situations.
Wear ear protectors with impact drills. 3. Do not touch the bit during or immediately after Exposure to noise can cause hearing loss. operation. The bit becomes very hot during operation and could cause serious burns. 4. When placing the drill on the floor, make sure that PRECAUTIONS ON USING DRILL the drill has stopped completely.
Accordingly, some parts (i.e. code numbers and/or design) may be changed without prior notice. NOTE: Due to HITACHI’s continuing program of research and development, the specifications herein are subject of change without prior notice.