Unpacking; Items Supplied; Placement; Utilisation - Silvercrest SIKP 2000 A1 Operating Instructions Manual

Only use cookware that is suitable for the size of
the hob 1. The diameter...
• may not exceed 26 cm, so that the pan does not
overhang,
• and may not be less than 16 cm, so that the ener-
gy field can actually work.
• The base of the pan may not be uneven, rather,
it must sit flat and squarely.
Only then can the induction cooker function perfectly.

Unpacking

Before taking the appliance into use check to ensure
that ...
• the appliance is undamaged, and also the power
cable with plug 0.
• all packaging materials are removed from the
appliance. Preserve the packaging so as to be
able to store the appliance under protection or
to transmit it through the post, e.g. for repairs.

Items supplied

After unpacking, check to ensure all items are avai-
lable. Being supplied are:
1 x Induction cooker
1 x Operating instructions

Placement

So as not to overheat, the appliance requires unre-
stricted ventilation. Therefore, position the appliance
such that ...
• there is an all-round free space of minimum
10 cm, e.g. to the nearest wall,
• a free space directly above of minimum 60 cm,
e.g. to a suspended wall cabinet.
For cooling, the appliance draws in air through the
openings on the underside.
• Therefore, place it only on firm and smooth sur-
faces, not on textiles or fluffy surfaces, such as
tablecloths.
• Do not place it adjacent to curtains, drapes or
other textiles that, due to the airflow, could press
themselves against the appliance.

Utilisation

When you have unpacked and positioned the ap-
pliance as described above, it is now ready for use.

a) Placing cooking vessels

• Place the cooking vessel in the middle of the hob 1.
This may ...
- not project over the edge of the hob 1 and ...
- not weigh more than 10 kg (together with its
contents).

b) Switching on

When cookware with content is standing on the
hob 1:
• Insert the plug 0 into the mains power socket. A
signal sounds, the control lamp 8 lights up and
"- L -" appears in the display 2. The appliance is
now ready.
• Press the button On/Off 9. The control lamps
3/4 blink and a signal tone sounds.
The appliance is now ready for use.

c) Switching off

The appliance switches off, ...
• if, within 30 seconds of switching on, you do not
select any further function,
• if you activate the button On/Off 9 once again,
also when it is in actual use.
- 4 -