Graphic Eq. Copying, Pasting, Comparing And Storing Geq Settings - Yamaha M7CL Quick Start Manual

The virtual rack; effects and graphic EQ:

Graphic EQ. Copying, pasting, comparing and storing GEQ settings.

At the top of the GEQ pop-up are buttons for COPY, PASTE, COMPARE and LIBRARY.
You can use the [RACK] tabs at the bottom
of the pop-up to move between different
GEQ units.
Press the [LIBRARY] button to store or
recall GEQ curves.
You can paste any GEQ curve to a 31BandGEQ but only curves with less than 15 bands moved will paste to a
Flex15GEQ.
Pressing the [COPY] button stores
the displayed GEQ curve into a
temporary "copy buffer". If
another GEQ is selected to the
screen, then pressing the [PASTE]
button will change that GEQ to
match the copied source.
If you copy a GEQ curve to the "copy
buffer", you can change the curve and then
press the [COMPARE] button to alternate
between the two curves.
Use any encoder below the screen to scroll through
the 199 library locations. Then press the [RECALL] or
[STORE] button.
8/20
M7CL Quick Start Guide Part 2