Effects/Graphic Eq. Assigning Effects And Geqs - Yamaha M7CL Quick Start Manual

The virtual rack; effects and graphic EQ:

Effects/graphic EQ. Assigning effects and GEQs.

By default in Scene 000, the effects are prepatched. The sends are MIX 13-16, the returns are STEREO 1-4.
However these can be easily repatched if desired.
GEQ can be assigned to any insert point; INPUT, MIX, MATRIX or MASTER channel. Effects can be inserted or
fed from a mix, matrix or master out.
Effects also need a channel assigned to return to. By default in Scene 000, the STEREO channels are
selected, but these can be changed. To get to the INPUT CH SELECT pop-up, press the grey output
button beside the effect image or go from the Centralogic™ overview screen to the PATCH/NAME
pop-up where you can route the effect return, name it and give it an icon.
Assign effect to ch. or ch. to effect
from these pop-ups.
Please note; when choosing to return the effect to a different channel, the original routing to the STEREO input
channel is not lost. You should reassign the STEREO channel either as unassigned or to its associated HA.
✘
6/20
M7CL Quick Start Guide Part 2