Sharp LC-70LE835E/RU Service Manual page 16

LC-70LE835E/RU, 836E/S, 838E
CHAPTER 4.
LC70LE835E REMOVING OF MAJOR PARTS
[1] REMOVING OF MAJOR PARTS
1. Removing of Stand Unit and Rear Cabinet Ass'y.
1. Remove the 4 lock screws
2. Remove the 1 lock screw
3. Disconnect AC wire and detach the AC Cord
4. Remove the 4 VESA Hole Covers
Stand Unit
[Precautions when mounting and removing the rear cabinet]
Basically, there is no problem as in LC-60LE632U. However, the screws on both sides are not tightened together with the Rear Cabinet Ass'y.
The inside is fixed by the module and Speaker.
Therefore, it does not come away completely, but only one side can come off.
Tighten together with the
Rear Cabinet Ass'y.
and detach the Stand Unit .
and detach the AC Cord Cover
.
, 9 lock screws and 21 lock screws
AC Cord Cover
VESA Hole Cover
2
Fix with the 70" LCD Panel Module Unit.
Service Manual
.
and detach the Rear Cabinet Ass'y
3
4
5 AC Cord
[AC]
7
6
1
[AC]
9 Rear Cabinet Ass'y
4 – 1
.
8
Only one side (outer) can come off.