Topfield CBI-2070 User Manual page 9

button switches the digital receiver between standby mode
and active mode.
light blinks every time you press a button on the remote
control.
STANDBY light lights up while the digital receiver is in standby
mode.
Front display shows the current time in standby mode, and
displays the current service in active mode.
? =
CHANNEL ,
vice.
There is a flap on the middle of the front panel that protects
the USB port behind it from dust, into which you can plug a
USB device like a memory stick.
1.2 Controlling the digital receiver 3
buttons switch to the previous or next ser-
If you want to watch pay services, pull
the right edge of the front panel to open
the flap, then insert your subscription
card into the front slot.When you in-
sert the subscription card, the side on
which the chip is mounted must face
upward.