Operational Conditions; Software (Operation System); Hardware; Interface - Toshiba B-EP Series Operation Manual

Portable barcode printer b-ep series;
Hide thumbs Also See for B-EP Series:
Table of Contents

Advertisement

Operational Conditions

The Product can be used under the following system and environmental requirements.

Software (Operation System)

English operation systems of:
Windows 2000, Windows XP, Windows Vista

Hardware

A DOS/V (IBM AT compatible) machine must be used under the above Windows operation system and
mandatory or recommended conditions explained in the table below.
CPU
Intel
Memory
64 MB or more
HDD
Free space of 10 MB or more
FDD
3.5-inch FDD

Interface

Connections are made through the following interface.
USB
However, the Product does not operate when more than one printer are connected at the same time.
Plug and Play requests printer driver installation. The Product does not need any printer driver. However,
printer driver installation is requested in every connection. If you use the Product frequently, it is recommended
to install a printer driver. For information about printer driver installation, please refer to our web site.
When the PC connection port is changed after you install a printer driver, you need to install it again. You can
avoid this by enabling printer's USB serial number setting.

Disclaimer

The Product allows the Administrator/User to monitor printer statuses, check/change printer setting, and
download a setting file on the computer monitor for the Supported Printers. When an invalid setting is
made for the Supported Printers using the Product, they may malfunction and may not be used
afterwards.
The Product is intended to be used by the Administrator who is familiar with the internal setting of the
Supported Printers and general-purpose printers. The Setting Tool and Downloader must be used by
the Administrator or under instructions of the Administrator.
TOSHIBA TEC shall not be liable for any outcome resulted from a failure to follow the above instructions
(both the Product and the Supported Printers).
Mandatory Conditions
®
®
II 400 MHz or higher
Pentium
Recommended Conditions
®
®
Intel
Pentium
256 MB or more
3
III 1 GHz or higher

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents