Sanyo VPC-SH1BK Service Manual page 19

Adjustment method:
1. Set the siemens star chart 100 ± 0.5 cm from lens surface
so that it becomes center of the screen (zoom wide and
tele). Set the camera and the chart in a straight, and do not
put optical systems (mirror and conversion lens etc.)
2. Double-click on the DscCalDi.exe.
3. Click the "Focus", and Click the "Yes".
4. Lens adjustment value will appear on the screen.
5. Click the OK.
DscCalDi
Focus Result
!
AF_TEMP_AD: 484
AF_WIDE: 2
AF_MID1: 5
AF_MID2: 9
AF_MID3: 12
AF_MID4: 27
AF_MID5: 45
AF_MID6: 107
AF_MID7: 0
AF_MID8: 0
AF_MID9: 0
AF_MID10: 0
AF_MID11: 0
AF_TELE: 0
Adjustment value determination is effectuated using below val-
ues.
The adjustment values fulfill the conditions below, they are de-
termined as within specifications.
Adjustment value determination
AF_TEMP_AD: ATAD
ATAD: adjustment value of focus temperature A/D
(270<=ATAD<=967)
AF_WIDE: ZW
ZW: adjustment value of focus at zoom position wide
(–380<=ZW<=200)
AF_MID1: ZM1
ZM1: adjustment value of focus at zoom position middle1
(–380<=ZM1<=200)
AF_MID2: ZM2
ZM2: adjustment value of focus at zoom position middle2
(-380<=ZM2<=200)
AF_MID3: ZM3
ZM3: adjustment value of focus at zoom position middle3
(–380<=ZM3<=200)
AF_MID4: ZM4
ZM4: adjustment value of focus at zoom position middle4
(–380<=ZM4<=200)
AF_MID5: ZM5
ZM5: adjustment value of focus at zoom position middle5
(–380<=ZM5<=200)
AF_MID6: ZM6
ZM6: adjustment value of focus at zoom position middle6
(–380<=ZM6<=150)
x
OK
AF_MID7: ZM7
ZM7: adjustment value of focus at zoom position middle7
(–380<=ZM7<=90)
AF_MID8: ZM8
ZM8: adjustment value of focus at zoom position middle8
(–380<=ZM8<=150)
AF_MID9: ZM9
ZM9: adjustment value of focus at zoom position middle9
(–380<=ZM9<=270)
AF_MID10: ZM10
ZM10: adjustment value of focus at zoom position middle10
(–380<=ZM10<=350)
AF_MID11: ZM11
ZM11: adjustment value of focus at zoom position middle11
(–380<=ZM11<=400)
AF_TELE: ZT
ZT: adjustment value of focus at zoom position tele
(–380<=ZT<=450)
3. AWB Adjustment
Camera
Preparation:
POWER switch: ON
Setting of pattern box:
Color temperature: 3100 ± 20 (K)
Luminance: 900 ± 20 (cd/m
Adjusting method:
1. Set a distance of 0.5-1.0 cm between the pattern box and
the camera. (Do not enter any light.)
2. Double-click on the DscCalDi.exe.
3. Click the AWB, and click the Yes.
4. AWB adjustment value will appear on the screen.
5. Click the OK.
– 19 –
Pattern box
(color viewer)
2 )