Sanyo VPC-SH1BK Service Manual page 18

2. Lens Adjustment (1m) is carried out after this adjust-
ment.
Dsc Calibration
Infinity calibration :
PZ_SW: -4
PZ_BR: 2
AF_BR: 2
AF_I_WIDE: 5
AF_I_MID1: 10
AF_I_MID2: 10
AF_I_MID3: 11
AF_I_MID4: 14
AF_I_MID5: 18
AF_I_MID6: 22
AF_I_MID7: 30
AF_I_MID8: 37
AF_I_MID9: 44
AF_I_MID10: 66
AF_I_MID11: 85
AF_I_TELE: 130
IRIS_GAIN: 50
IRIS_OFFSET: 183
When all of the AWB adjustment screen
is not displayed, use a scroll bar.
Adjustment value determination is effectuated using below
values.
The adjustment values fulfill the conditions below, they are de-
termined as within specifications.
Adjustment value determination
PZ_SW: ZSW
ZSW: adjustment value of zoom PI switch position
(-22<=ZSW<= 42)
PZ_BR: PBR
PBR: adjustment value of zoom backrush pulse
(0<=PBR<=5)
AF_BR: ABR
ABR: adjustment value of focus backrush pulse
(0<=ABR<=5)
AF_I_WIDE: ZIW
ZIW: infinity adjustment value of focus at zoom position
wide (–380<=ZIW<=200)
AF_I_MID1: ZIM1
ZIM1: infinity adjustment value of focus at zoom position
middle1 (–380<=ZIM1<=200)
AF_I_MID2: ZIM2
ZIM2: infinity adjustment value of focus at zoom position
middle2 (–380<=ZIM2<=200)
AF_I_MID3: ZIM3
ZIM3: infinity adjustment value of focus at zoom position
middle3 (–380<=ZIM3<=200)
AF_I_MID4: ZIM4
ZIM4: infinity adjustment value of focus at zoom position
middle4 (–380<=ZIM4<=200)
x
OK
Copy
– 18 –
AF_I_MID5: ZIM5
ZIM5: infinity adjustment value of focus at zoom position
middle5 (–380<=ZIM5<=200)
AF_I_MID6: ZIM6
ZIM6: infinity adjustment value of focus at zoom position
middle6 (–380<=ZIM6<=200)
AF_I_MID7: ZIM7
ZIM7: infinity adjustment value of focus at zoom position
middle7 (–380<=ZIM7<=200)
AF_I_MID8: ZIM8
ZIM8: infinity adjustment value of focus at zoom position
middle8 (–380<=ZIM8<=200)
AF_I_MID9: ZIM9
ZIM9: infinity adjustment value of focus at zoom position
middle9 (–380<=ZIM9<=270)
AF_I_MID10: ZIM10
ZIM10: infinity adjustment value of focus at zoom position
middle10 (–380<=ZIM10<=350)
AF_I_MID11: ZIM11
ZIM11: infinity adjustment value of focus at zoom position
middle11 (–380<=ZIM11<=400)
AF_I_TELE: ZIT
ZIT: infinity adjustment value of focus at zoom position
tele (–140<=ZIT<=450)
IRIS_GAIN: g
g: adjustment value of gain (0<=g<=255)
IRIS_OFFSET: o
o: adjustment value of offset (0<=o<=255)
2. Lens Adjustment (1m)
Camera
Preparation:
POWER switch: ON
Adjustment condition:
Siemens star chart (A3)
Fluorescent light illumination with no flicker
Illumination above the subject should be 700 lux ± 10%.
Note:
Do not vibrate during the adjustment.
If readjusting after it has already been adjusted, wait for 15
minutes or more for the unit to cool down first.
100 0.5 cm
Siemens
star chart