Parts Ordering; Engine Identification Numbers; Emission Compliance; Engine Specifications - Kohler Courage SH265 Owner's Manual

Repairs
Repair information is available in Kohler Engine
service manuals, which are available at
KohlerEngines.com, or at Kohler Engine Service
Centers. Major repairs generally require the services
of a trained mechanic and the use of specialized
tools and equipment. Kohler Engine Service Centers
have the facilities, training, and genuine Kohler
replacement parts necessary to perform these services.
For the nearest sales and service location, visit our
Web site at KohlerEngines.com, or in the U.S. and
Canada call 1-800-544-2444.

Parts Ordering

The engine model, specification, and serial numbers
are required when ordering replacement parts from
your Kohler Engine Service Center. These numbers
are found on the identification plate, which is affixed
to the engine shrouding. Include letter suffixes if there
are any. (Refer to Engine Identification Numbers.)
Always insist on genuine Kohler replacement parts, as
they adhere to strict standards for fit, reliability, and
performance. Visit KohlerEngines.com or your Kohler
Engine Service Center.

Engine Identification Numbers

1 22
See Figures and
Engine identification numbers will appear on one
of several variations of labels affixed to the engine
(Figure 22). See Figure 1 for Engine Identification
Label location (H).
When ordering parts, or in any communication
concerning this engine, always give the model name,
specification number, and serial number — including
any letter suffixes.
Record all engine ID numbers for future reference.
Serial Number and Spec Number
21 22
See Figures and
The spec number (A) and serial number (B) is etched
into the engine block, directly below the fuel tank.
When ordering parts, or in any communication,
always provide model, specification number (A), and
serial number (B). Record these numbers for future
reference. See Figure .
21
Additional engine identification numbers can be
found on the engine ID labels. See Figure

Emission Compliance

See Figure
The Emission Compliance Period referred to on the
Emission Control or Air Index label indicates the
number of operating hours for which the engine has
been shown to meet Federal and CARB emission
requirements. The following table provides the Engine
Compliance Period (in hours) associated with the
category descriptor found on the certification label.
Emission Compliance Period
Below 225 cc
Refer to certification label for engine displacement.
Exhaust Emission Control System for model SH265 is
EM for U.S. EPA and Europe.

Engine Specifications*

Model
Bore
Stroke
Displacement
Gross Power @ 3600 RPM**
Net Power @ 3600 RPM**
Net Peak Torque @ 2800 RPM
Compression Ratio
Weight (Recoil Start)
Oil Capacity
Fuel Capacity
Exhaust Emission Control
System
*Kohler Co. reserves the right to change product specifications,
designs, and equipment without notice and without incurring
obligation.
**Horsepower ratings exceed Society of Automotive Engineers
Small Engine Test Code J1940. Actual engine horsepower is lower
and affected by, but not limited to, accessories (air cleaner, exhaust,
charging, cooling, fuel pump, etc.), application, engine speed, and
ambient operating conditions (temperature, humidity, and altitude).
22.
22
EPA Category C
125 hours
68 mm (2.7 in.)
54 mm (2.1 in.)
196 cc (12 cu. in.)
4.9 kW (6.5 HP)
4.1 kW (5.5 HP)
11.5 N·m (8.5 ft. lb.)
16 kg (35.3 lb.)
EM for U.S. EPA and
SH265
8.5:1
EN
.60 L (.63 qt.)
3.6 L (3.8 qt.)
Europe
15