Kohler COMMAND CH18-745 Service Manual page 208

3. Connect the governor spring from the main
control bracket to the appropriate hole in the
governor lever as indicated in the following charts.
Note that hole positions are counted from the
pivot point of the governor lever. See Figure 11-82
and the appropriate chart.
6 mm Governor Lever and Hole Position/RPM Chart
Gov. Lever
High Idle RPM Hole No.
3801-4000
3601-3800
3451-3600
3301-3450
3101-3300
2951-3100
2800-2950
3750*
3150*
*5% Regulation (others 10%)
Governor Spring
Color Code
5 Clear
4 Clear
3 Clear
2 Clear
4 Purple
3 Purple
2 Purple
3 Clear
3 Purple
Figure 11-82. Connecting Spring to Governor
Lever.
Governor
Lever
Section 11
Reassembly
6
5
4
3
2
1
Governor
Idle Hole
11.23
11