Table of Contents
Advertisement
must not exceed the «MAX» mark in the
drawer). Close the drawer gently.
SELECT THE REQUIRED PROGRAMME
BY TURNING THE PROGRAMME
SELECTOR DIAL (1)
Turn the programme selector dial to the re-
quired programme. The washing machine
will propose a temperature and automati-
cally select the maximum spin value provi-
ded for the programme you have chosen.
You can change these values by operating
the corresponding buttons. The green pilot
light of the button 8 starts to flash.
The selector dial can be turned either clock-
wise or counterclockwise. Turn to position
to reset programme/Switching the ma-
chine off.
At the end of the programme the selec-
tor dial must be turned to position
to switch the machine off.
Caution! If you turn the programme
selector dial to another programme
when the machine is working, the red
pilot light of button 8 will blink 3 times
and the message Err is displayed to
indicate a wrong selection. The
machine will not perform the new
selected programme.
SELECT THE TEMPERATURE BY
PRESSING BUTTON 3
By selecting a programme, the appliance
proposes automatically a default tempera-
ture.
Press this button repeatedly to increase or
decrease the temperature, if you want your
laundry to be washed at a different temper-
ature.
Downloaded From WashingMachine-Manual.com Manuals
REDUCE THE SPIN SPEED BY
PRESSING BUTTON 4
By selecting a programme, the appliance
proposes automatically the maximum spin
speed provided for that programme.
Press button 4 repeatedly to change the
spin speed, if you want your laundry to be
spun at a different speed.
SELECT THE AVAILABLE OPTIONS BY
PRESSING BUTTONS 4, 5 AND 6
Depending on the programme, different
functions can be combined. These must be
selected after choosing the desired pro-
gramme and before pressing button 8.
When these buttons are pressed, the corre-
sponding icons appear on the display.
When they are pressed again, the icons
disappear. If an incorrect option is selected,
the integrated red pilot light of the button 8
flashes for 3 times and the Err message
appears on the display for a few seconds.
For the compatibility among the wash-
ing programmes and the options see
chapter «Washing Programmes».
SELECT THE DELAY START BY
PRESSING BUTTON 7
Before you start the programme, if you wish
to delay the start, press the button 7 re-
peatedly, to select the desired delay. The
,
corresponding icon 2.6 will appear on the
display in the upper part of the display.
The selected delay time value (up to 20
hours) will appear on the display a few sec-
onds, then the duration of the programme
will appear again.
You must select this option after you have
set the programme and before you press
button 8.
You can cancel or modify the delay time at
any moment, before you press button 8.
Selecting the delayed start:
1. Select the programme and the required
options.
2. Select the delay start by pressing the
button 7.
3. Press button 8:
– the machine starts its hourly count-
down.
– The programme will start after the
selected delay has expired.
electrolux 9
Advertisement
Table of Contents
