Storing The Tire Sealant And Compressor Kit; Tire Changing - Chevrolet Camaro 2012 Owner's Manual

10-76 Vehicle Care
Removal and Installation of the
Sealant Canister
To remove the sealant canister:
1. Remove the plastic cover.
2. Unscrew the connector (B) from
the canister (A).
3. Pull up on the canister (A) to
remove it.
4. Replace with a new canister
which is available from your
dealer.
5. Push the new canister into
place.
6. Screw the connector (B) to the
canister (A).
7. Slide the plastic cover back on.
Storing the Tire Sealant
and Compressor Kit
The tire sealant and compressor kit
is located in a foam container in the
trunk.
1. Open the trunk. See Trunk on
page 2 8.
2. Remove the carpet.
I n f o r ma t i o n P r o v i d e d b y :
3. Turn the center retainer
counterclockwise to remove the
cover.
4. Remove the tire sealant and
compressor kit from the foam
container.
To store the tire sealant and
compressor kit, reverse the steps.

Tire Changing

Removing the Spare Tire and
Tools
Spare Tire
1. Open the trunk. See Trunk on
page 2 8.
2. Remove the carpet.