Bluetooth; Recognition) - Chevrolet Camaro 2012 Owner's Manual

7-26 Infotainment System
Declining a Call
Turn the MENU/SELECT knob to
Decline and press the MENU/
SELECT knob to decline the call.
Switching Between Calls (Call
Waiting Calls Only)
To switch between calls:
1. Turn or press the MENU/
SELECT knob.
2. Select Switch Call from
the menu.
Conference Calling
Conference calling and three way
calling must be supported on the
Bluetooth phone and enabled by the
wireless service carrier to work.
To start a conference while in a
current call:
1. Turn or press the MENU/
SELECT knob.
2. Select Enter Number.
3. Enter the character sequence
then select Call. See Entering
a Character Sequence in
Operation on page 7 4 for more
information.
4. After the call has been placed,
turn or press the MENU/
SELECT knob and choose
Merge Calls.
5. To add more callers to the
conference call, repeat Steps 1
through 4. The number of callers
that can be added is limited by
your wireless service carrier.
Ending a Call
Turn or press the MENU/SELECT
knob and select Hang Up.
Muting a Call
To Mute a Call
Turn or press the MENU/SELECT
knob and select Mute Call.
To Cancel Mute
Turn or press the MENU/SELECT
I n f o r ma t i o n P r o v i d e d b y :
knob and select Mute Call.
Dual Tone Multi-Frequency
(DTMF) Tones
The in vehicle Bluetooth system can
send numbers during a call. This is
used when calling a menu driven
phone system.
1. Turn or press the MENU/
SELECT knob and select Enter
Number.
2. Enter the character sequence.
See Entering a Character
Sequence in Operation on
page 7 4 for more information.
Bluetooth (Voice

Recognition)

Using Voice Recognition
To use voice recognition, press the
/ button located on the steering
wheel. Use the commands below for
the various voice features. For
additional information, say Help
while you are in a voice
recognition menu.