Basic Wireless Settings - HP R110 Configuration And Administration Manual

This page includes the following information:
Wireless
Displays the basic radio settings and the status of other features.
•
Radio: Displays the status of the router's radio.
•
Operating Frequency: (Applies to the R1 10 only) Shows if the radio is operating at
2.4 GHz or 5 GHz.
•
Mode: The current radio mode.
•
Channel: The current operating channel.
•
WMM: Displays the status of the WMM feature.
•
WMM Power Save: Displays the status of the WMM power save feature
•
Radio ON/OFF Schedule: Shows if a defined time schedule is set for the radio.
VAP1
Displays the settings and feature status for the primary Virtual Access Point (VAP) interface. If
other VAP interfaces are enabled (VAP2 to VAP4), they are also listed.
•
SSID: The service set identifier, or network name, of the VAP interface.
•
MAC Address: The physical layer address of the VAP interface.
•
Authentication Mode: The wireless security method configured for the VAP.
•
Encryption Type: The data encryption configured for the VAP.
•
WPS: Indicates if WPS is enabled for the VAP.
•
WDS: Indicates if WDS is enabled for the VAP.

Basic wireless settings

The basic wireless settings allow you to turn the router's wireless function on or off, and set up
basic wireless settings for radio signal characteristics and wireless security features.
52 Wireless configuration