Table of Contents
Advertisement
Timer Recording
What is FREEVIEW+
FREEVIEW+ is the functions that enable timer recordings to be controlled by the signal
sent from the broadcaster. "Guide Link", "Series recording" (
are available.
"Guide Link" — If you set a timer recording from the TV Guide, the recording's start and
stop times can be controlled by the broadcaster, e.g. delayed start.
This is indicated by "Guide Link" in the Timer Recording screen in step (
"Split Programme" — If a programme is separated into 2 or more parts by some other
programmes e.g. news, this unit pauses recording during the gap.
This is indicated by "Split" in the Timer Recording screen in step (
When setting timer from the 1st split programme, other parts of the programme will be
automatically set and indicated by the timer mark on the TV Guide, but not shown on the
timer recording list.
If you set a timer recording from the TV Guide, the recording's start and stop times
are controlled by the signal sent from the broadcaster. If the signal is not sent
correctly, the recording may lack the beginning or the ending part of the programmes.
In order to make the timer recording work successfully, we recommend you set the
start time earlier and the end time later by some minutes, up to a maximum of 10
minutes for Guide Link to function.
e.g. When you set the timer recording for a programme that will start at 10:00 and
end at 11:00, set "9:58" and "11:05" in step (
[HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW]
Preparation:
Turn on the television and select the appropriate video input to suit the
connections to this unit.
Turn on this unit.
If recording to DVD, insert a disc that you use for recording (
Confirm that the clock on the unit's display is set to the correct time.
– The GUIDE Plus+ list appears.
, , to select the future programme, then
OK
Tue 18/08/09
19:45
-24
hours
TIMER REC
RETURN
– If "Selection Screen" appears, press [, ] to select "Single Timer Rec.", then press
[OK].
Refer to "Series recording" (
Confi rm the programme (start and end time) by
TV magazine, etc. and correct if necessary using
, , , , then
– The settings are stored and the timer programme is on.
– The timer icon is displayed.
– "" lights on the unit's display to indicate timer recording standby has been activated.
– Repeat steps – to programme other recordings.
– Press [] to turn the unit off.
"Guide Link" will not be displayed and will not function under the following conditions.
– Timer programmes set manually (
– Timer programmes set from the TV Guide are modifi ed or start/stop time changed by more
than 10 minutes from original time.
(Series): Series recording (
Downloaded From Disc-Player.com Panasonic Manuals
(Split):
The programme is split in two or more parts by other programmes. This unit pauses
recording during the gap between the parts of the programme.
?
TM
Timer
TV Guide:
Landscape
Recording
All Types
All
Channels
Tue 18th
2 BBC 2
Holiday Programme
Time:
BBC 1
BBC 2
Channel 4
Channel 5
2
Category
+24
hours
Prog. Type
OPTION: Select Advert, etc.
Page
info
Guide Change Display Mode
Page
"Guide Link", "Split" and "Series" are displayed here.
32) for "Series Timer Rec.".
OK
Timer icon
28).
32) is set.
32), and "Split Programme"
below).
below).
below).
15).
Remain
HDD
30:24 SP
DVD
1:58 SP
TUE 18/08/09 19:45:00
Selection screen
TUE 14.10.08 12:54:00
HDD
Channel
Date
Stop
Mode
STTL
AD
Start
View
DVD
The West Tonight
2 BBC 2
18/ 8 TUE
20:30
22:30
HDD
SP
OFF
OFF
Single Timer Rec
3 TV
Series Timer Rec
All Channels : BBC 2
News & Factual
Holiday Programme
Delete
TUE 14.10.08
Programme Name
(Guide Link)
18:00 18:30
Press OK to store the programme.
Series Info
OK
OK
DELETE
0
--
9
Number
RETURN
RETURN
y
&
TV
VOL
CH
DRIVE
SELECT
A A
A V
P A P P G E
3
1
2
CH
4
5
6
P R OG/CHEC K
8
9
7
MANUAL SKIP
DELETE
0
INPUT
SELECT
SKIP
SL O W/SEARC H
P A P P US E
PL AY/x1.
A A
3
ST O P
S TA TU
A A S
EXIT
OK
OPTION
RETURN
CRE A T A A E
CHAPTER
Tips
To check programmes (
29)
To cancel a timer recording
programming
1. Press [, , , ] to select
the programme (the timer icon is
displayed), then press [OK].
2. While "Delete" is selected, press
[OK].
3. Press [, ] to select "Yes", then
press [OK].
– The timer icon disappears.
Notes
[RAM] [-RW‹V›] [+R] [+RW] To use a new
disc, formatting is necessary.
The GUIDE Plus+ list is not displayed
immediately after initial tuning is
done.
The GUIDE Plus+ system will not
work if the clock is not set correctly.
If "NTSC" has been selected for "TV
System" (
65), the GUIDE Plus+
system cannot be used.
"FR" recording mode is not available
when the timer programme is controlled
by "Guide Link".
The receipt of the TV Guide system
data is only possible via the aerial
input of this unit. The receipt of the TV
Guide data via externally connected
satellite receivers is not possible.
If you set a timer recording that will
overlap with other timer recordings,
the "Overlapped Timer Recording"
screen appears to help you resolve
the overlapping.
Follow the on-screen instructions.
21
Advertisement
Table of Contents
