Table of Contents
Advertisement
Tips
To browse through the list
Press [ CH].
DVB Auto Setup
You can restart auto channel setting for digital terrestrial channels if
the setup (
13) fails for some reason.
However, if you perform "DVB Auto Setup", all channel settings and
all the timer recording programmes are deleted. (All the settings
except for the ratings level, ratings password, Owner ID and Clock
return to the factory preset.) Recordings on the HDD are not be
deleted.
When the confi rmation screen appears
Press [] to select "Yes", then press [OK].
Tips
You can also use the following method to restart Auto-Setup.
When the unit is turned on and stopped, press and hold
[CH ] and [CH ] on the main unit simultaneously for about
5 seconds.
–Auto-Setup screen appears.
DVB Manual Tuning
You can set channels manually if the "DVB Auto Setup" could not be
completed successfully.
Setup
Favourites Edit
DVB Auto Setup
DVB Manual Tuning
Tuning
Add New DVB Channels
Disc
Signal Condition
Picture
DVB Preferred Multi Audio
Sound
DVB Preferred Subtitles
Display
Connection
Others
1 Press [, ] to select the channel you want to set.
– Select the channel by checking the signal strength and signal
quality displays.
[Refer to "Signal Condition" (
quality.]
2 Press [OK] to start scan.
The set channel is displayed in the
table.
3 Press [EXIT], then press [ CH] to check that applicable
channels have been selected.
Add New DVB Channels
You can search for newly added digital terrestrial channels to
receive.
Setup
Favourites Edit
DVB Auto Setup
DVB Manual Tuning
Tuning
Add New DVB Channels
Disc
Signal Condition
Picture
DVB Preferred Multi Audio
Sound
DVB Preferred Subtitles
Display
Connection
Others
– The unit starts searching for newly available digital terrestrial
channels. This takes about 5 minutes.
– The bar over the table shows you the search progress. At the end of
the search, the number of found new digital stations appears.
– "No new DVB channels found.", is displayed when no new channels
can be found.
Press [OK] to save the newly found channels.
Downloaded From Disc-Player.com Panasonic Manuals
DVB Manual Tuning
Frequency
[CH54]
Signal Quality
0
0
Signal Strength
No.
Channel Name
Type
English
English
TAB
SELECT
RETURN
OK
TV: 0
Radio: 0
Data: 0
START SCAN
RETURN
CH
right) for signal strength and signal
DVB Manual Tuning
Frequency
[CH54]
Signal Quality
0
Signal Strength
0
No.
Channel Name
1
BBC ONE Wales
2
BBC 2W
3
BBC NEWS 24
4
BBC Radio Wales
5
ITV
TV: 15
Radio: 4
8 DVB channels found.
START SCAN
RETURN
CH
Add New DVB Channels
Scan
CH 21
CH
Channel Name
Type
27
BBC ONE Wales
TV
English
27
TV
BBC 2W
English
27
BBC NEWS 24
TV
27
BBC Radio Wales
Radio
TAB
SELECT
RETURN
OK
TV: 15
Radio: 4
Data: 0
Searching...
RETURN
Tips
To cancel in middle
Press [RETURN ].
The channels found before stopping are not saved.
Signal Condition
You can check the quality and strength of digital broadcast signals.
Realign the aerial if you are receiving a poor signal.
When "Signal Condition" is displayed in grey and cannot be
selected:
1 Press [EXIT] to exit the screen.
2 Press [ CH] to select a digital channel. "D" appears on the unit's
display.
3 Display the Setup menu again.
Setup
Favourites Edit
DVB Auto Setup
DVB Manual Tuning
Tuning
Add New DVB Channels
Disc
Signal Condition
Picture
DVB Preferred Multi Audio
Sound
DVB Preferred Subtitles
Display
Connection
Others
The quality and strength of the signal are shown.
Press [ CH] to select the channel.
Signal Quality
Below 2 (display red)
738.0
MHz
10
2–5 (display orange)
10
New
Over 5 (display green)
Signal Strength
The display for signal strength is grey. "0" means signal strength 0%,
"10" means signal strength 100%.
If the signal is too strong, the display will change from grey to red.
Reduce the signal amplifi cation at your aerial.
When the signal is weak:
– check that the aerial is correctly positioned.
– adjust the aerial reception with "DVB Manual Tuning" in the Setup
738,0
MHz
menu (
left).
10
10
– check that the current digital broadcast channel is correctly
Type
New
TV
-
broadcasting.
TV
-
TV
-
Radio
-
DVB Preferred Multi Audio
TV
-
Data: 0
Choose the audio language for digital broadcast.
If the selected language is not available, then the original language
will be selected.
[English] [Welsh] [Gaelic]
DVB Preferred Subtitles
Choose the subtitle language for digital broadcast.
If the selected language is not available, then the original language
will be selected.
[English] [Welsh] [Gaelic]
[English for hearing impaired]
[Welsh for hearing impaired]
68
[Gaelic for hearing impaired]
Quality
9
9
9
9
English
English
DVB Signal Condition
DVB Channel
TAB
SELECT
Signal Quality
0
RETURN
OK
Signal Strength
0
RETURN
The signal quality is so poor that there
may be interference in the pictures and
sound.
The signal quality is basically adequate,
but brief interference in the pictures and
sound is possible in isolated case.
Optimum picture and sound quality.
10
10
Channel +
Channel –
61
Advertisement
Table of Contents
