Programming Playback Sequence - PROTRON PDV-70X User Manual

OMPDV70X.book Page 14 Sunday, May 28, 2006 8:45 PM
Playing Kodak Picture CDs

Programming Playback Sequence

The PROGRAM button brings up the Program menu, which allows you to
program playback sequence. There are 16 slots available.
To program playback sequence:
Press PROGRAM to bring up
1.
the Program menu.
2. Select the first slot using the
arrow controls, and enter
the desired folder (under
the "T" column) and file
(under the "C" column)
numbers using the keypad.
3. Proceed in the same manner
through the next slots until
the whole sequence is programmed.
4. Select "PLAY" using the arrow controls and then press
back the sequence.
Select "CLEAR" and press
P RO G
T C T
1 – – : – – 5 – – :
2 – – : – – 6 – – :
3 – – : – – 7 – – :
4 – – : – – 8 – – :
P L A Y
to clear the playback sequence and start over.
14
C T C T C
– – 9 – – : – – 1 3 – – : –
– – 1 0 – – : – – 1 4 – – : –
– – 1 1 – – : – – 1 5 – – : –
– – 1 2 – – : – – 1 6 – – : –
C L E A R
to begin playing
–
–
–
–