General Installation Information; Removing Screen; Installing Canopy - Monessen Hearth DIS33 Installation And Operating Instructions Manual

GENERAL INSTALLATION INFORMATION

REMOVING SCREEN

Remove fireplace screen by pushing screen frame panel
up and out. See Figure 2.
Do not operate the unit without
the screen frame panel and canopy
installed.
NOTE: Fireplace screen must
be removed to access log box
and to install canopy.

INSTALLING CANOPY

1. Remove the fireplace screen as described in the previous section.
2. Align canopy with the holes in the top frame assembly. See Figure 3.
3. Install the five (5) screws (in owner's manual packaging) which attach the canopy to the top frame assembly.
See Figure 3.
4. Tighten all screws. Make sure the canopy is level and secure. Install the fireplace screen.
8
Figure 2 - Removing Fireplace Screen
Figure 3 - Installing Canopy
26D3311