Dcm MC-HD200 User Manual page 39

Control

IR remote controller cannot control the camera
1. Change the battery
2. Check the camera working mode.
3. Check IR address of the Remote Commander is set correctly.

Serial communication cannot control the camera
1. Check the camera working mode.
2. Check control cable is connected correctly.
Copyright Notice
The contents of this manual are copyrighted by our company. This document Cannot be cloned, copied or
translated without the permission of the company. Product specifications and information which were referred to
in this document are for reference only, and the content will be updated at any time without prior notice.
DCM Technologies Co., Ltd.
38
2014.10