Using exposure bracketing
Use exposure bracketing to determine the best exposure (light) level for your
conditions. During exposure bracketing, the camera takes 3 pictures:
■
One at + (above normal) exposure
■
One at 0 (normal) exposure
One at - (below normal) exposure
■
Evaluate the 3 pictures, and decide which exposure level is right for you. (Burst is not
available in all modes.)
Using the camera Help button
To better understand each menu option, use camera Help.
Highlight a menu choice, then press the Info
www.kodak.com/go/support
1 Press the Drive button repeatedly to choose
Exposure Bracketing.
2 Press the Shutter button halfway to focus and set
exposure.
3 Press the Shutter button completely down to
take the 3 pictures.
To evaluate the pictures, press the Review button.
Drive
NOTE: To widen or narrow the exposure bracketing interval (the
difference in exposure compensation),
Turn on/off Help
Scroll up/down
Taking pictures/videos
button.
see page
29.
13