Supermicro X8DT6 User Manual page 83


Set LAN Confi guration
Set this feature to confi gure the IPMI LAN adapter with a network address.
Channel Number
Enter the channel number for the SET LAN Confi guration command. It is initially
set to [1].
Channel Number Status
This feature displays the channel status for the Channel Number selected above:
"Channel Number is OK".

IP Address Confi guration
This submenu displays the following IP Address Confi guration information.
Parameter Selector
This item displays the parameter of your IP Address confi guration.
IP Address Source
This feature allows the user to determine how an IP address is assigned to this
device. Select DHCP (Dynamic Host Confi guration Protocol) to allow this device
to obtain an IP address from a DHCP server, which manages a pool of IP ad-
dresses and network information on a "request and grant" basis. Upon timeout
(or lease expiration), the IP address assigned to the client can be re-assigned
to a new client. Select Static (Static Allocation) to manually enter an IP address
from a specifi c range of addresses (usually assigned by a network administra-
tor). A client with an IP Address that falls into this specifi c range of addresses
will be allowed to access the network. A static IP Address assigned to a device
is retained until a different address is manually reassigned to it. The options are
DHCP and Static.
IP Address
This item displays the IP address of this computer. IP addresses are four
three-digit decimal numbers, from 0 to 255, separated by dots. For example,
192.168.10.100.
Current IP Address in BMC
This item displays the current IP address used for your IPMI connection.

MAC Address Confi guration
This submenu displays the following MAC Address Confi guration information.
4-21
Chapter 4: AMI BIOS