Supermicro X8DT6 User Manual page 74

X8DT6/X8DT6-F/X8DTE/X8DTE-F User's Manual
Select Auto to allow the AMI BIOS to automatically detect the PIO mode. Use
this value if the IDE disk drive support cannot be determined.
Select 0 ~ 4 to allow the AMI BIOS to use PIO mode 0 ~ 4. It has a data transfer
rate of 3.3 MB/s ~ 16.6 MB/s. See the table below.
Option Selected
0
1
2
3
4
DMA Mode
Select Auto to allow the BIOS to automatically detect IDE DMA mode when the
IDE disk drive support cannot be determined. The default setting is Auto. See
the table below for DMA Mode Select Options.
Option Selected
SWDMA 0
SWDMA1
SWDMA 2
MWDMA 0
MWDMA1
MWDMA 2
UDMA 0
UDMA 1
UDMA 2
UDMA 3
UDMA 4
UDMA5
UDMA 6
S.M.A.R.T. For Hard disk drives
Self-Monitoring Analysis and Reporting Technology (SMART) can help predict
impending drive failures. Select Auto to allow the AMI BIOS to automatically de-
tect hard disk drive support. Select Disabled to prevent the AMI BIOS from using
the S.M.A.R.T. Select Enabled to allow the AMI BIOS to use the S.M.A.R.T. to
support hard drive disk. The options are Disabled, Enabled, and Auto.
32Bit Data Transfer
Select Enable to enable 32-bit IDE data transfer support. The options are En-
abled and Disabled.
PIO Mode Select Options
PIO Mode
PIO Mode 0
PIO Mode 1
PIO Mode 2
PIO Mode 3
PIO Mode 4
DMA Mode Select Options
DMA Mode
Single-Word DMA 0
Single-Word DMA 1
Single-Word DMA 2
Multi-Word DMA 0
Multi-Word DMA 1
Multi-Word DMA 2
Ultra DMA 0
Ultra DMA 1
Ultra DMA 2
Ultra DMA 3
Ultra DMA 4
Ultra DMA 5
Ultra DMA 6
4-12
Max. Transfer Rate
3.3 MB/s
5.2 MB/s
8.3 MB/s
11.1 MB/s
16.6 MB/s
Max. Transfer Rate
2.1 MB/s
4.2 MB/s
8.3MB/s
4.2 MB/s
13.3 MB/s
16.6 MB/s
16.6 MB/s
25 MB/s
33.3 MB/s
44.4 MB/s
66.6 MB/s
100 MB/s
133 MB/s