Supermicro X8DT6 User Manual page 12

X8DT6/X8DT6-F/X8DTE/X8DTE-F User's Manual
FAN5
P1-DIMM3A
P1-DIMM3B
FAN6
P1-DIMM2A
P1-DIMM2B
P1-DIMM1A
P1-DIMM1B
CPU1 CP
FAN8/
CPU2 Fan
SLOT7 PCI-E 2.0 X8
SLOT6 PCI-E 2.0 X8
JPL1
SLOT5 PCI-E 2.0 X8
SLOT4 PCI-E 2.0 X8
JPL2
SLOT3 PCI-E 2.0 X4
SLOT1 PCI-E X4
JI2C2
JI2C1
1. Jumpers not indicated are for test purposes only.
2. " " indicates the location of Pin 1. Also, refer to Chapter 2 for detailed infor-
mation on the onboard components.
3. When LE1 is on, the onboard power connection is on. Make sure to unplug
the power cables before removing or installing components.
4. Slot 4: PCI-E 2.0 x8 is available on the
5. To avoid possible system overheating, be sure to provide adequate airfl ow to
the system.
Warning: To prevent damage to the power supply or motherboard, please
use a power supply that contains a 24-pin and two 8-pin power connec-
tors. Be sure to connect these connectors to the 24-pin (JPW1) and the
two 8-pin (JPW2, JPW3) power connectors on the motherboard. Failure
in doing so will void the manufacturer warranty on your power supply and
motherboard.
Motherboard Layout
JPI2C1
X8DT6/E Series
TPM
JP7
T-SGPIO1
I-SATA5
T-SGPIO2
I-SATA4
USB3 USB2
USB6/7 USB4/5
I-SATA3
JPG1
X8DTE/X8DTE-F
1-4
JPW2
JPW1 JPW3
CPU2
P2-DIMM1B
P2-DIMM1A
P2-DIMM2B
P2-DIMM2A
P2-DIMM3B
P2-DIMM3A
Rev. 2.01
LED1
SAS0~3
SAS4~7
JIBTN1
I-SATA2
I-SATA1
JPS1
I-SATA0
JL1
JWF1
JWD
FAN1
FAN7
CPU1 Fan
LE1
FAN2
FAN3