Main Unit; The Unit's Display - Panasonic Diga DMR-EH55 Operating Instructions Manual

Main unit

1
Opening the front panel
Press down on the
1 Standby/on switch (Í/I) (➡ 18)
Press to switch the unit from on to standby mode or vice versa. In
standby mode, the unit is still consuming a small amount of power.
2 Disc tray (➡ 24, 34)
3 Connection for digital video (DV) camcorder (➡ 58)
4 SD card slot (➡ below)
5 Display (➡ below)
6 Connection for camcorder etc. (➡ 58)
7 Linked timer recordings with external equipment (➡ 33)
8 Channel select (➡ 24)
Inserting, Removing the SD card
When the card indicator ("SD") on the unit's display is flashing, the card is being read from or written to. Do not turn off the unit or remove the card.
Such action may result in malfunction or loss of the card's contents.
≥Inserting foreign objects can cause a malfunction.
≥You can use SD Memory Cards with capacities from 8 MB to 2 GB (➡ 7).
Opening the cover
Press the protruding
part to open the
cover.
Automatic drive select function
≥If you insert an SD card while the unit is stopped, the "SD Card" screen is displayed. Select an item and press [ENTER] to switch to the SD drive
( ➡ 40, 56).
If you remove an SD card, the HDD drive is automatically selected.

The unit's display

6
1 Linked timer recordings with external equipment indicator
2
Recording
REC
3 Timer recording indicator
4 Lights when the SD card is inserted in the card slot.
5 Lights when a disc that is supported by this unit is inserted in the
Downloaded From Disc-Player.com Panasonic Manuals
tray.
3
2
6
part with your finger
Inserting the card
Press on the centre of the
If you are using a
card until it clicks into
miniSD
place.
into the miniSD
adaptor that comes
with the card.
Insert and remove this
adaptor from the unit.
Insert the card label up with
the cut-off corner on the right.
(Do not forget to close the cover. ➡ right)
1
REC
PLAY
7 8
Playback
Recording/Playback
REC
PLAY PLAY
5
4
OPEN/CLOSE
EXT LINK CH
S VIDEO IN VIDEO IN L/MONO -AUDIO IN- R
DV IN AV3
7 8
9 Open/close disc tray (➡ 24, 34)
: Select drive (➡ 24, 34, 40)
Drive changes each time you press [DRIVE SELECT].
; Stop (➡ 24, 35)
< Start play (➡ 34)
= Start recording (➡ 24)/Specify a time to stop recording (➡ 26)
> Remote control signal sensor
Rear panel terminals (➡ 14, 15)
Removing the card
1
TM card, insert it
2
TM card
ADAPTER
3
2
4
5
6 Lights when the HDD, DVD or SD drive is selected
7 Main display section
8 Recording mode
DRIVE REC
SELECT
k1.3
1.3
9 : ; < = >
Closing the cover
Press down.
Press on the centre of
the card.
Pull it straight out.
RQT8415
13